Step 1: Reset Your TP-Link WiFi Extender

1. Find the Reset Button:
   • Look for a small reset hole on the extender (usually on the side or bottom).
2. Press & Hold the Reset Button:
   • Use a paperclip or pin to press and hold the button for 10-15 seconds until the LED blinks.
   • The extender will reboot and reset to factory settings.
3. Wait for the Extender to Restart:
   • This takes about 1-2 minutes.
   • The default WiFi name should now be something like “TP-Link_Extender_XXXX” (where XXXX are random numbers/letters).

Step 2: Connect to the Extender’s Default WiFi

1. Go to WiFi Settings on Your Phone or Computer.
2. Look for the WiFi network starting with “TP-Link_Extender_XXXX” and connect.
3. No password is required at this stage (if prompted, try admin or leave it blank).

Step 3: Set Up the Extender Using TP-Link Tether App

1. Download & Open the TP-Link Tether App
   • If you haven’t already, download the app from:
     • Android: Google Play Store
     • iPhone: App Store
2. Select Your TP-Link Extender from the Device List.
3. Follow the On-Screen Instructions:
   • Choose your main WiFi network (the router you want to extend).
   • Enter your router’s WiFi password (this is the same as your main WiFi).
   • Set an extended network name (same as your main WiFi or a new one).
   • Save and apply the settings.

Step 4: Reconnect to the WiFi Extender

1. Once setup is complete, the extender will restart.
2. Reconnect to the extended WiFi using the same password as your main router (or the new one you set).
3. Done! Your TP-Link WiFi Extender is now reset and properly configured. 🚀