The EX65 Explosion Protected Camera is a highperformance, smart surveillance camera for explosive environments. Utilizing Dinion 2X imaging, the camera offers unrivaled image quality in the worst lighting conditions. Electropolished 316L stainless steel construction ensures the ultimate environmental protection available today.A single pre-assembled unit with an integrated junction box, the EX65 is designed to be easy to install. Through any of the four 3/4in. conduit entries (M20 adapter also included), connections are made to the convenient terminal block; there is also space for any additional wiring. Also accessible through the junction box is the optional fiber optic module that provides versatility for longer cable runs or whereelectromagnetic interference is a concern. Features: Construction of electro-polished 316L stainless steel or aluminum High-resolution, high-sensitivity Dinion 2X imager with wide dynamic range (WDR) Integrated socket ATEX, UL, IECEx and INMETRO certifications Lens hood Simple Single Module Installation Optional integrated fiber optic module Specifications: Rated voltage 12-24 VAC. AC, 50/60 Hz12 – 24 VDC. current Type CCD 1/3 “interline transfer, wide dynamic range double-gate Active pixel 752 x 582 Horizontal resolution 540 TVL The signal-to-noise ratio > 50 dB Video Composite 1 V (peak), 75 ohms Synchronization Inside, the synchronization of the network, external (HV-lock) and total (with flash) Shutter Auto (1/50 [1/60] to 1/10000) for selectionAuto (1/50 [1/60] to 1/50000) automaticflicker-free, fixed choice Sensitization Adjustable from Off. up to 10x Day / night Color, Mono, Auto Auto Black Continuous Auto, Off. Dynamic engine XF-Dynamic, 2X-Dynamic, SmartBLC Dynamic range 120 dB (20-bit signal processing) Dynamic Noise Reduction Auto, On. / Off. optionally Clarity Select the level of contrast SmartBLC On. (Along with the 2X-Dynamic) / Off. Automatic gain control AGC ON. or Off. (0-30 dB) for the selection of Inverting the peak white point Power on / off White balance Automatic, AWB-hold and manual adjustment (from 2500 to 10000 K) Alarm output VMD or switch “day / night” Output relay alarm 30 VAC. current or +40 VDC. current max. 0,5 A continuous, 10 VA Cable compensation (only coaxial version) Up to 1000 m coax without external amplifiers (automatic configuration and combination of Bilinx communication over coax cable) Camera ID Edited line of 17 characters, adjustable position Test pattern generator Color bars 100%, 11 shades of gray, schedule Sawtooth 2H, checkerboard, mesh, UV plane Profiles Six (6) programmable preset modes Remote control (only coaxial version) Bilinx bi-directional coaxial communication VMD A fully programmable area Masking Four (4) independent areas, fully programmable Management On-screen menus, soft keys (in different languages) Lens 5-50 mm IR correction Heater Included Specifications of fiber optic cables Type of optical connector ST Fiber optic compatibility 50/125 or 62.5 nm / 125 nm multimode fiber, the minimum bandwidth of 600 MHz / km. For fiber 50/125 should subtract 4 dB from the indicated value of the optical balance Optical distance These transmission distance is limited by optical loss of the fiber and any additional loss caused by zippers and patch panels. The modules are designed to operate over the entire range of optical losses, however, they do not require a minimum loss to start Number of fibers One (1) The optical balance 14 dB Maximum distance 4 km Type of technology Videomodulyatsiya AM Wavelength 850 nm Optical transmitter Light-emitting diode Transmitter output power 25 mW (-16 dBm) Video bandwidth from 5 Hz to 10 MHz Differential gain <5% Phase shift <5 ° Tilt <1% The signal-to-noise ratio > 55 dB attenuation of 10 dB> 60 dB attenuation of 7 dB Mechanical characteristics Dimensions (L x W x H) 381 x 114 x 114 mm without the sun visor or the mounting frame Weight Stainless steel: 12.9 kgAluminum: 6.4 kg Structure The design of the electrolytically polished 316L stainless steel or anodized aluminum Bracket Panning (± 36 °) / inclination (± 45 °), including the mounting frame Cable entry Four (4) of the opening of 3/4 inch, NPT; M20 adapter included with PAL models Viewer Window 9mm thick borosilicate float glass Terms of Use Operating Temperature – Models with a body made of aluminum from -50 ° C to 60 ° C- Models with stainless steel from -50 ° C to +55 ° C Working Humidity 0-100% relative (with condensate, after installation and sealing)
